Home |  Gloves  |  Eyewear  |  Footwear  |  Workwear  |  Kitbags  | 

EN Safety Standards


Lens Markings




ATTENTION:
If mechanical strength impact grade does not follow with the letter T the eyewear must only be used at room temperature. 
If different lenses and frames are combined: Frame and lens have different markings F(T), B(T), or A(T), the lower level shall 
be assigned to the complete eyewear. A frame marked with a 9 must be fitted with a lens marked 9 in addition to F(T), B(T), or 
A(T) marking.


Frame Markings

TRAVERRSE LOGO / EN166 STANDARD / FIELD OF USE / MECHANICAL STRENGTH / CE


Lens Coating

OPTIC+ permanent lens coatin, superior anti-fog and anti-scratch technology. Polycarbonate lenses with UV protection.


Lens Colour

Clear Lens

Standard lens for safety glasses, & as it provides the highest Visible Light Transmission (VLT), it is by far the most commonly 
used lens for indoor use. Suitable for general use.

Smoked Lens

Most commonly used tint for safety eyewear. Effectively dims surroundings with minimal colour distortion.


back